Description
Call for pricing and availability. Nationwide shipping!
Some dedicated stump grinders are over-complicated. Not the Toro STX. Its patented Toro® Dingo® TX-style control system has two simple levers that are simple to learn, master and use. Combine these easy-to-use controls with tracks and transport speeds exceeding 4 mph, and you get maximum productivity. The Intelli-Sweep® feature automatically slows the sweep speed of the cutting head based on the load of the wheel, so heavy cutting loads won’t bog down the engine. The tracks travel easily over muddy areas, with the low center of gravity adds side hill stability for access to any job, in any condition. In addition, the hydraulically driven head means no chance of expensive belts breaking or slipping, and no adjusting tension - guaranteeing optimal performs time after time.
Specifications
Cutter Depth - Above Grade 33 in. / 83.8 cm
Cutter Depth - Below Grade 12.5 in. / 31.7 cm
Engine Cooling System Air Cooled
Engine Horsepower 26.0 hp
Engine Make Kawasaki
Engine Model FX-730V Twin Cylinder 4-cycle
Fuel Type Gasoline
Head Swing 47" (119.3 cm) arc length x 90˚ sweep arc
Height 46 in. / 116.8 cm
Length 78 in. / 198.1 cm
Start Method Electric
Transmission Hydrostatic
Travel Speed - Forward Up to 4.2 mph / 6.7 kph
Weight 1,200 lbs / 544 kg
Wheel 19" (48.2 cm) diameter to tooth: .75" (1.9 cm) thick: 12 grinder teeth
Width 34 in. / 86.3 cmSpecifications
Year2024
ManufacturerTORO
Hours0
ModelSTX26
ConditionNew
Hours MeterAccurate / Verified
Operator TypeWalk-Behind
Cutting Depth33 in
Horsepower26 HP
Shipping Width34 in
Shipping Length78 in
Shipping Height46 in
Shipping Weight544.31 kg
Year2024|
ManufacturerTORO|
Hours0|
ModelSTX26|
ConditionNew|
Hours MeterAccurate / Verified|
Operator TypeWalk-Behind|
Cutting Depth33 in|
Horsepower26 HP|
Shipping Width34 in|
Shipping Length78 in|
Shipping Height46 in|
Shipping Weight544.31 kg|
