Description
- Height: 9'
- Width: 7'8"
- Length: 18'10
- Gross weight (single/tandem): 9,000/10,500 lb
- Suspension (single axle): (1) 12,000 lb Torflex
- Suspension (tandem axle): (2) 7,000 lb Torflex
- Infeed Opening (height x width): 39" x 64"
- Drum (width x diameter): 24 5/8" x 30"
- Engine Options: CAT, Deutz, PSI
- Horsepower: 174-275 HP
- Fuel tank capacity : 40 gallons
- Hydraulic oil capacity: 18 gallons
- Frame: 6" C-Channel
- Tires: 235/75R x 17.5"
- Hitch 2.5" Pintle
- With its large capacity and high-production volume reduction capabilities, this chipper is perfect for residential tree services, vegetation management lot and land clearing, maintenance contractors and municipalities
- Modular design makes maintenance and repairs fast and easy
- Equipped with a wide infeed opening, dual feed wheels and straight flow-through design, the feed system easily climbs over material, reducing drag and increasing chipping efficiency
- Bearing style feed wheel pivot assembly contours the radius of the drum, reducing dead space between the feed wheel and drum and creates a mechanical advantage for increased down pressure
- Direct drive bottom feed wheel with clean-out door is speed matched to the top feed wheel to provide continuous material flow
- Morbark's exclusive ZeroClutch removes the anxiety of engaging the chipper drum, damaged drive belts, and burned clutch discs, and elevates your operating experience. The ZeroClutch monitors the drum speed and will not allow the clutch to engage if material is lodged between the feed wheel and drum
- Large diameter chipping drum with staggered knife pockets maintains chipping power while providing consistent chip quality
- Reversing automatic feed system stops and momentarily backs away material for increased feeding efficiency and quicker engine recovery
- Composite fuel and hydraulic tanks
- Unit can be outfitted with a four or six cylinder diesel engine and choice of a single or tandem axleSpecifications
Year2025
ManufacturerMORBARK
ModelBVR19
ConditionNew
Fuel Capacity151.42 L
Machine TypeBrush
Operating Weight4,762.72 kg
Power TypeEngine Powered
Max Chipping Capacity19 in
Chipper TypeDrum
Chipper Width82.8 cm
Chipper Diameter76.2 cm
Infeed Chute Height99.06 cm
Infeed Chute Width162.56 cm
Throat Opening Height50.8 cm
Throat Opening Width64.52 cm
Feed SystemYes
Number of Feed Rollers2
Infeed TableYes
Infeed Table TypeFixed
Swivel DischargeYes
Axle TypeTandem
Trailer Hitch TypePintle
Fuel TypeDiesel
Year2025|
ManufacturerMORBARK|
ModelBVR19|
ConditionNew|
Fuel Capacity151.42 L|
Machine TypeBrush|
Operating Weight4,762.72 kg|
Power TypeEngine Powered|
Max Chipping Capacity19 in|
Chipper TypeDrum|
Chipper Width82.8 cm|
Chipper Diameter76.2 cm|
Infeed Chute Height99.06 cm|
Infeed Chute Width162.56 cm|
Throat Opening Height50.8 cm|
Throat Opening Width64.52 cm|
Feed SystemYes|
Number of Feed Rollers2|
Infeed TableYes|
Infeed Table TypeFixed|
Swivel DischargeYes|
Axle TypeTandem|
Trailer Hitch TypePintle|
Fuel TypeDiesel|
