2023 HITACHI ZX350

2023

350

02

Used

QFRL001

ZX250LC-6 SPECIFICATIONS 20 ENGINE Model ............................ Isuzu 4HK1 Type .............................. 4-cycle water-cooled, common rail direct injection Aspiration ...................... Variable geometry turbocharged, intercooled, cooled EGR Aftertreatment ............... DOC and SCR system No. of cylinders ............. 4 Rated power ISO 14396: 2002 Gross 188 hp (140 kW) at 2,000 rpm ISO 9249: 2007 Net..... 177 hp (132 kW) at 2,000 rpm Maximum torque ........... 499 lbf-ft (676 Nm) at 1,800 rpm Piston displacement ...... 317 cu. in. (5.19L) Bore and stroke ............ 4.5" x 4.7" (115 mm x 125 mm) Batteries ........................ 2 x 12 V/126 Ah HYDRAULIC SYSTEM Hydraulic Pumps Main pumps .................. 3 variable displacement axial piston pumps Maximum oil flow ........ 1 x 52.8 gal/m (1 x 200 L/min) Pilot pump .................... 2 x 59.2 gal/m (2 x 224 L/min) Maximum oil flow ........ 1 gear pump Maximum oil flow 9.4 gal/m (35.5 L/min) Hydraulic Motors Travel ............................ 2 variable displacement axial piston motors Swing ............................ 1 axial piston motor Relief Valve Settings Implement circuit ........... 4,975 psi (34.3MPa) Swing circuit .................. 4,830 psi (32.4MPa) Travel circuit .................. 4,975 psi (34.3MPa) Pilot circuit .................... 566 psi (3.9MPa) Power boost ................. 5,511 psi (38.0MPa) Hydraulic Cylinders Quantity Bore Rod diameter Boom 2 4.9" (125) 3.5" (90) Arm 1 5.5" (140) 3.9" (100) Bucket 1 5.1" (130) 3.5" (90) UPPERSTRUCTURE Revolving Frame D-section frame for resistance to deformation. Swing Device Axial piston motor with planetary reduction gear is bathed in oil. Swing circle is single-row. Swing parking brake is spring-set/hydraulic-released disc type. Swing speed ................. 11.0 rpm Swing torque ................. 57,161 lbf-ft (77.5 kNm) UNDERCARRIAGE Tracks Tractor-type undercarriage. Welded track frame using selected materials. Side frame welded to track frame. Lubricated track rollers, idlers, and sprockets with floating seals. Track shoes with triple grousers made of induction-hardened rolled alloy. Heat-treated connecting pins with dirt seals. Hydraulic (grease) track adjusters with shock-absorbing recoil springs. Numbers of Rollers and Shoes on Each Side Upper rollers ........... 2 Lower rollers ........... 9 Track shoes ............. 51 Track guards ........... 3 Travel Device Each track driven by 2-speed axial piston motor. Parking brake is spring-set/hydraulic-released disc type. Automatic transmission system: High-Low. Travel speeds ........... High: 0 to 3.4 mph (0 to 5.5 km/h) Low: 0 to 2.2 mph (0 to 3.4 km/h) Maximum traction force ........................ 49,908 lbf (222 kN) Gradeability.............. 70% (35 degree) continuous SERVICE REFILL CAPACITIES Unit: gal (L) Fuel tank ............................................. 135 (510) Engine coolant .................................... 9 (34) Engine oil ........................................... 7 (26) Swing device....................................... 2.4 (9.1) Travel device (each side)...................... 2.1 (7.8) Hydraulic system................................. 77 (290) Hydraulic oil tank................................. 41 (156) DEF/AdBlue® tank............................... 18 (70) ENVIRONMENT Engine Emissions ......................... EPA Final Tier 4/EU Stage IV SOUND LEVEL Sound level in cab according to ISO 6396: 2008 ....................... *LpA 67 dB(A) External sound level according to ISO 6395: 2008 and EU Directive 2000/14/EC ............. *LwA 102 dB(A) *At PWR mode

6.41 cu yd

80,093.94 lb

Yes

Yes

Yes

Hydraulic

6.84 mph

270.89 HP

Isuzu

4HK1

10

36,330 kg