Get Financing
Call for price
Machine Location:1957 Sennebogen TrailStanley, North Carolina, USA 28164
Seller Information
View Seller Information
General
Year
2020
Manufacturer
Hours
9,782
Model
Condition
Used
Description
2020 Sennebogen 830 M E-Series wheeled material handler. 225 HP Cummins Tier 4 Final, 20 kW magnet system included, ~84,900 lbs. Ready to work.
2020 Sennebogen 830 M E-Series with K15 material-handling boom and stick. Approximately 9,782 hours. Wheeled, rubber-tired MP30E undercarriage. 20 kW Baldor magnet system with Hubbell controller included. Located in Texas — freight quotes available. Ready to go straight to work in scrap and recycling operations.
ENGINE:
• Cummins QSB 6.7 C225 — 6-cylinder, in-line, water cooled
• 225 HP (168 kW) @ 2,000 rpm
• EPA Tier 4 Final | high-pressure common-rail injection
• Automatic idle-stop control | Eco-mode
• Dual-stage air filtration with pre-filter
HYDRAULIC SYSTEM:
• LUDV load-sensing, pilot-pressure controlled open center
• Variable-displacement axial-piston pump
• Max pump flow: 137 gpm (520 L/min) | Max pressure: 5,076 psi (350 bar)
• Dual filtration system — 3-micron HydroClean
MAGNET SYSTEM (INCLUDED):
• 20 kW Baldor generator
• Hubbell controller | hydraulic drive
• 230 V magnetized
SWING SYSTEM:
• Swing speed 0–8 rpm | open-loop hydraulic
• Axial piston motor driving planetary gearbox, integrated brake valves
• External-teeth sealed ball-bearing swing ring | spring-loaded multidisc swing brake
UNDERCARRIAGE / TRAVEL:
• Rubber-tired MP30E
• All-wheel drive | variable-displacement motor | dual-stage power-shift transmission
• Travel speed: 0–4.35 mph (low) / 0–12.43 mph (high)
• Tires: 8 x 12.00-20 solid rubber | joystick steering
• Front axle oscillating with hydraulic lock & safety check valves | rear axle fixed
• Disc service brake | spring-loaded multidisc parking brake | travel alarm
CAB & CONTROLS:
• Sennebogen maXCab
• Integrated ECM | automatic idle-stop | Eco-mode
• 2 x cab roof halogen + 2 x frame upper-carriage H4 lights
CAPACITIES:
• Fuel tank: 132 gal (500 L)
• Hydraulic system: 180 gal (680 L) | Hydraulic tank: 82 gal (310 L)
• Engine oil w/ filter: 4.49 gal (17 L)
WEIGHT:
• Operating weight: ~84,900 lbs (38,500 kg)
FACTORY SUPPORT:
• $65 million parts inventory — Stanley, NC
• 24/7 on-call parts service
• Factory-direct technical support
APPLICATIONS:
Scrap Processing | Recycling Centers | Industrial Sorting | Material Handling
LOCATION:
Texas — Contact us today for a machine & freight quote.