All(56)
$95,198
Machine Location:4435 State Hwy 274Trinidad, Texas, USA 75163
Seller Information
View Seller InformationProvidence Equipment, LLC
Contact:Sales
Phone:(903) 778-2000
Trinidad, Texas, USA 75163
General
Year
2016
Manufacturer
Model
Hours
5,325
Serial Number
KMT0D130CGA095168
Condition
Used
Description
Machine Highlights
Year: 2016
Make: Komatsu
Model:D39PXI-24
Cab
6 Way Blade
AC/Heat
105 HP
Operating Weight: 22,950lbs
Hours: 5325
SN: KMT0D130CGA095168
Warranty
EXTENDED WARRANTY AVAILABLE FOR PURCHASE
Ask one of our salesmen for more information!
Engine
Model : Komatsu SAA4D95LE-7
Engine type : 4-cycle, water-cooled, direct injection
Aspiration : Variable-flow, turbocharged, air-to-air aftercooled
Number of cylinders : 4
Bore × stroke : 3.75 × 4.52 in
Piston displacement : 199 in³
Governor : All-speed electronic
Gross horsepower : 107 HP
Net horsepower : 105 HP
Rated engine speed : 2,200 rpm
Fan drive type : Hydraulic
Lubrication method : Gear pump, force lubrication
Oil filter type : Full-flow
Emissions certification : EPA Tier 4 Final
Hydrostatic Transmission
Transmission type : Dual-path hydrostatic
Maximum forward speed :
Maximum reverse speed :
1st forward speed : 0–2.1 mph
1st reverse speed : 0–2.5 mph
2nd forward speed : 0–3.5 mph
2nd reverse speed : 0–4.0 mph
3rd forward speed : 0–5.3 mph
3rd reverse speed : 0–5.3 mph
Variable-mode forward speed : 0–5.3 mph
Variable-mode reverse speed : 0–5.3 mph
Final Drives
Travel motor type : In-shoe-mounted axial-piston motors
Gear reduction : Integrated two-stage planetary
Sprocket ring : Bolt-on with triple-labyrinth seal
Steering System
Steering control : Palm Command Control System (PCCS) joystick
Steering transmission : Hydrostatic Transmission (HST)
D39EX/EXi-24 minimum turning radius : 87 in
D39PX/PXi-24 minimum turning radius : 94 in
General Undercarriage
Suspension : Rigid type
Track roller frame : Monocoque, large-section construction
Rollers and idlers : Lubricated track rollers
Track type : Sealed and lubricated
Undercarriage system : Parallel Link Undercarriage System (PLUS)
Track-tension adjustment : Grease gun
Undercarriage
Track rollers per side : 6
Standard shoe type : Single grouser
Shoes per side : 39
Grouser height : 1.9 in
Standard shoe width : 20 in
Ground contact area : 3,707 in²
Ground pressure : 5.24 psi
Track gauge : 5 ft 4 in
Track length on ground : 7 ft 8 in
Narrow Undercarriage
Track rollers per side : 7
Standard shoe type : Single grouser
Shoes per side : 39
Grouser height : 1.9 in
Standard shoe width : 25 in
Ground contact area : 4,616 in²
Ground pressure : 4.39 psi
Track gauge : 5 ft 11 in
Track length on ground : 7 ft 8 in
Wide Undercarriage
Track rollers per side : 7
Standard shoe type : Single grouser
Shoes per side : 39
Grouser height : 1.9 in (47 mm)
Standard shoe width : 27.5 in (700 mm)
Ground contact area : 5,110 in² (32,830 cm²)
Ground pressure : 3.98 psi (27.4 kPa)
Track gauge : 5 ft 11 in (1,810 mm)
Track length on ground : 7 ft 8 in (2,345 mm)
Service Refill Capacities
Coolant capacity : 9.0 US gal
Fuel capacity : 50.2 US gal
Engine oil capacity : 2.9 US gal
Hydraulic tank capacity : 17 US gal
Final-drive capacity per side : 0.9 US gal
DEF tank capacity : 2.6 US gal
Hydraulic System
Hydraulic system type : Closed-Center Load Sensing System (CLSS)
Hydraulic pump type : Piston-type hydraulic pump
Hydraulic pump flow capacity : 26.2 US gal/min
Relief valve pressure : 3,974 psi
Relief valve pressure metric : 280 kg/cm²
Hydraulic cylinder type : Double-acting piston type
Hydraulic oil refill capacity : 17 US gal
Hydraulic Cylinders
Blade-lift cylinders : 2
Blade-lift cylinder bore : 3.0 in
Blade-tilt cylinders : 1
Blade-tilt cylinder bore : 3.5 in
Blade-angle cylinders : 2
Blade-angle cylinder bore : 3.2 in
Control Valves
Power-angle-tilt dozer control valve : 3-spool
Blade-lift positions : Raise, hold, lower and float
Blade-tilt positions : Right, hold and left
Blade-angle positions : Right, hold and left
Ripper control valve : Additional valve required
Ripper-lift positions : Raise, hold and lower
Dimensions
Overall Width : 10 ft 8 in
Track Length : 7 ft 8 in
Overall length : 14 ft 5 in
Overall Height : 9 ft 4 in
Overall Width : 8 ft 2 in
Ground clearance : 15 in
Approximate Operating Weight
D39PXi-24 operating weight : 22,950 lb
2016 KOMATSU D39PXI-24 6 WAY BLADE CAB DOZER WITH AC/ HEAT AND AN OPERATING WEIGHT OF 22,950LBS! EXTENDED WARRANTY AVAILABLE FOR PURCHASE. ASK ONE OF OUR SALESMEN FOR MORE INFORMATION!
SE HABLA ESPAÑOL!
BANK FINANCING AVAILABLE!
PLEASE CALL US WITH ANY QUESTIONS!
ASK ABOUT OUR REASONABLE SHIPPING RATES!
Attachments
Blade Tilt
Yes
Blade Tilt Type
6-Way
Blade Capacity
84.78 cu ft
Capacities
Fuel Capacity
50.2 gal
Category Specific
Operating Weight
22,950 lb
Grade Control
Yes
Grade Control Ready
Yes
Exterior
ROPS
Enclosed
Interior
A/C
Yes
Heater
Yes
Powertrain
Horsepower
105 HP
Transmission Type
Hydro
Number of Speeds
3
Max Travel Speed
5.3 mph
Engine
Engine Manufacturer
KOMATSU
Engine Serial Number
KMT0D130CGA095168
Engine Arrangement
4-cylinder
Engine Tier
USA Tier 4 Final
Engine Turbo
Yes